6
Section 1. Installation
-
This appliance must be installed by a qualified electrician.
-
Remove all packaging, protective film and securing tape from
the appliance.
-
Position the appliance in a dry atmosphere.
-
The following dimensions are provided as a guide for
installation – your installer will carry out the installation in
accordance with the current regulations.
-
Your electrician will connect the cooker in accordance with the
current regulations.
To install this appliance, please proceed as follows:
1.1.
Positioning the Cooker
You must ensure a minimum gap of 2cm between the back
of the appliance and the rear wall to allow for ventilation. You
must ensure a minimum distance of 70cm between the
hotplate and overhanging cupboards or a cooker hood (as
shown above).
Summary of Contents for MDC600FK
Page 15: ...15...
