6
Section 1. Installation
-
Remove all packaging, protective film and securing tape from the appliance.
-
Position the appliance in a dry atmosphere.
- The following dimensions are provided as a guide for installation
– your installer will
carry out the installation in accordance with the current regulations.
- Your installer will connect the power cable in accordance with the current regulations.
To install this appliance, please proceed as follows:
1.1. Work-Surface Cut-Out & Position Near Walls
1.2. Securing the Hob
Apply the self-adhesive sealing tape all the way around the lower edge of the cooking
surface as seen in the below diagram.
Now position the hob into the work surface cut-out to secure it into place.
Adjoining Walls
A(mm) B(mm)
Combustible
60
150
Non-combustible
25
40
