Cut out the opening in the work top for the hob (see
diagrams/sizes above).
Fit the seal and make sure it is a perfect fit. Lower the
hob into place and align correctly.
Using a standard screwdriver, tighten the tension
clamps evenly starting at the centre and moving
diagonal, until the built-in rim is tight on the worktop.
1.2. Electrical Connection
These appliances have a total Power Rating of
2500W (MON- SP300X) and 5500W (MON-SP600X &
MON-SP600W).
The product must be installed by a Qualified
Electrician.
These appliances are not supplied with a factory
fitted power cord – your qualified installer will supply
and fit a suitable cord.
The mains supply cable should be fixed in
accordance with the following instructions:
Switch the appliance off at the control
switch.
Open the terminal block on the underside
of the hob.
Unscrew the terminal screws fixing the
cable.
The “green-yellow” earth wire must be
connected to the terminal marked
. It
must be about 10 mm longer than the live and neutral wires.
The “blue” neutral wire must be connected to the terminal marked
with letter (N) - the live wire must be connected to the terminal
marked with letter (L).
Please note that a switchable spur should be
accessible above the work surface in order that the
power can be turned off.
8
