RP620 Power Vent Indoor Gas Fireplace
Page 39
XG0777 - 100113.1
Maintenance
Replacing Light Bulbs
The
RP620*
light bulbs can be replaced in a few simple steps. Begin
by disconnecting the power to the fireplace. Follow the directions for
removing the screen and outer glass on
page 30.
Once the screen
and outer glass have been successfully removed, proceed with
figures 28 - 28b
.
Note: Always wear gloves when handling the fireplace light bulbs
or glass panels.
Figure 28
.
Figure 28a
. .
Figure 28b
.
Step 1:
Remove remove any decorative media and up-lighting
glass from the light kit tray.
Step 2:
To remove a light bulb, pull the light bulb away from the
light bulb connector and lift the light bulb up and out.
Step 3:
Rotate the newly replaced light bulb in a full circle.
Step 4:
Replace up-lighting glass in the burner tray.
