Installing Optional Speckled Stones
[RR300SS]
Once the glass door has been removed as shown in
the previous section, place the speckled stones evenly
across the pan and burner. Ensure stones do not overlap
too much as this will effect the flame pattern, see
figure
25. DO NOT
cover the pilot with stones, see
figure 25a.
Figure 25
. Evenly placed speckled stones
Figure 25a
. Ensure the stones DO NOT cover the pilot.
If the firestones are not placed properly (ONE LAYER
ONLY), on burners excessive sooting will result. The
firestones will get very hot while the fireplace is in
operation, and should not be handled until cool.
Figure 24c.
Completed firestone installation. (Note: DO NOT
place ANY firestones on top of the pilot cover).
Figure 24d.
Gas fireplace with firestones.
CAUTION!
If the pilot cover is covered with firestones it may result
in delayed ignition and/or damage to the appliance and/
or surrounding property.
WARNING!
WARNING:
This appliance is intended for use only with
the included Montigo burners and accessories.
Never install or add any additional or alternative media,
rock wool or other material in this appliance.
The use of additional or alternative materials may pose
potential safety hazards, damage to the appliance, and
void manufacturer’s warranty.
Page 26
PL42DF* Indoor Gas Fireplace
XG0217 - 160215.1
Installation
