7
6
1
•
888
•
557
•
3848
Wards.com
WARNING:
Keep all packaging material away from children. Packaging material can
pose a risk of suffocation to children.
• Dispose of packaging materials in accordance with local ordinances.
• Install and store Compact Washing Machine where it will not be exposed to
direct sunlight or temperatures below freezing.
• Plug into a 3-prong grounded outlet. Do not use an adapter or extension cord.
Do not remove or alter the 3-prong plug.
1. Install washer on a stable, level surface. The machine must be level to operate
safely and for peak efficiency. Use the level adjustment feet to level the machine.
2. Maintain a distance of at least 4 inches from walls or other objects.
3. Slide the base stabilizer plate into the bottom on front of the machine.
The drain hose can exit out of either side for your convenience. To change the direc-
tion of the drain hose, follow these instructions:
Remove screw from
drain hose joint.
Move drain hose to
opening on other side.
Fasten screw to fix
hose in place.
4. Insert drain hose into sink, stand pipe or floor drain. Drain hose must not be lower
than 2 ft. or higher than 3.5 ft. above floor level. The drain hose should be properly
secured to avoid the possibility of flooding.
5. Move to the next section to secure the inlet hose.
Installation
Installation
(cont’d)
Inlet Hose Connection
The water inlet hoses bring the water from your faucet to the washer. Follow these
easy steps to install.
Sink Faucet Installation (cold water only)
1. Remove the aerator from the faucet.
2. Attach the faucet adapter to the faucet.
• Use female adapter (internal threads) or combine both female and male
adapters if faucet has internal threads.
• Place gasket between adapter and faucet.
3. Connect the cold water inlet hose to the faucet adapter.
4. Connect the other end of the inlet hose to the cold water intake on the back of
the washing machine.
5. Place the intake cap over the hot water intake on the washing machine.
Water Supply Installation (hot and cold water)
1. Connect the hot and cold water inlet hoses to the water inlet plumbing in your
house.
2. Connect the cold water hose to the cold water inlet on the back of the washing
machine. Repeat for hot water hose.
• Confirm that screen is positioned inside of the hot and cold water inlets on
the washing machine.
• Use gaskets on both ends of the hose connectors.
3. Slowly open both water valves. Tighten connections if leaking occurs.
Cold Water
Connector
Hot Water
Intake Cap
Cold Water Inlet
Hose
Connecting Nut
Cold Water
Inlet Hose
Cold Water
Connector
Hot Water
Connector
Connecting Nut
