Montgomery Ward WSP-1202 Instruction Manual Download Page 4

   7

6

1

888

557

3848

Wards.com      

  1. Set the press on a flat, level heat-resistant surface.
  2.  Turn the Locking Knob dial to “unlock” and lift the Pressing Handle to open the 

press. The press will automatically stay in lifted position.

  3.  Before plugging in the press, fill the Water Tank using the Water Refill Con-

tainer provided. Slide the Water Tank forward and pour the water into the holes 
of the tank. When finished, slide the tank back into place. Water is only neces-
sary when using the Steam Burst Button.

  

NOTE: When filling the Water Tank, distilled water is preferred, but 
not mandatory.

 

 NOTE: The Water Tank is not removable. It is designed to store any 
water left over from use. Do NOT attempt to force it free.

  4.  Plug in and press On/Off Button. The red Power Indicator Light will illuminate. 

Make sure the Pressing Plate is in the open position when the unit is initially 
turned on. Make sure the board cover is on before using.

  5.  Select the desired temperature and allow the press to heat before use. Use 

the Fabric Temperature Selection arrows to choose fabric setting. It may take a 
few minutes to reach the chosen temperature when decreasing or increasing 
settings.

  

NOTE: It takes approximately 5 minutes for the press to reach the 
Linen temperature.

Fabric

Nylon

Silk

Rayon

Wool

Cotton

Linen

Temp.

212°F

266°F

284°F

320°F

392°F

410°F

Steam

No

No

No

Yes

Yes

Yes

Warning: During initial use or after a long period of time without use, press 
the Steam Burst Button continuously for several seconds to clear Pressing 
Plate of residual water or calcium buildup in system before use.

CAUTION: Be sure to examine the garment label before selecting a fabric 
setting. If you cannot determine a fabric type, select the lowest setting and 
increase as needed. It is best to start with the most delicate fabrics first to 
avoid damage to your fabric.

Assembly and Use

Parts & Features

A.
B.
C.
D.
E.
F.
G. 
H. 
I.
J.
K.
L.
M. 
N. 
O. 
P. 

Pressing Plate
Pressing Handle
Steam Burst Button
Locking Knob (use when storing)
Removable Ironing Board Cover
Cord Storage Compartment
Water Tank
Ironing Board
Power Light (red)
Ready Light (green)
Steam Ready Light (yellow)
Power On/Off Button
Fabric Temperature Selection
Pressing Cushion
Spray Bottle
Water Refill Container

Summary of Contents for WSP-1202









Reviews: