Montgomery Ward SW769248, Instruction Manual, Page: 5 / 8

1
•
888
•
557
•
3848 Wards.com
8 9
How to Use (cont.) How to Use (cont.)
WARNINGS:
• Wear appropriate personal hearing protection during use. Under some
conditions and duration of use, noise from this product may contribute to
hearing loss.
• DO NOT wear loose clothing or jewelry. Cover or tie long hair back.
• Gloves and closed-toe footwear are recommended.
• Wear safety glasses or goggles when operating this product.
• Use a face or dust mask, if needed.
ASSEMBLE THE BLOWER
1. Attach the rear tube to the blower by aligning the
tube with the housing as shown. Push the tube into
the blower housing until the lock button snaps into
place.
2. Attach the front tube to the rear tube by aligning
as shown. Push the tubes together until the lock
button snaps into place.
3. Align the battery with the cavity in the main
housing. Insert the battery until the battery
release button snaps into place. The battery can
only be installed one way.
4. To remove the battery, press the release button on
the battery and pull the battery out of the cavity.
USING THE BLOWER
1. Start the blower by squeezing the trigger switch. Release the trigger switch to
turn off the blower.
2. Rotate the speed control wheel to accelerate or decelerate air speed (1 is the
lowest speed and 6 is the highest).
3. Carefully point the blower (it could move heavy material and cause injury or
damage) and move forward slowly to move the leaves or other material. Avoid
collisions with hard objects which could damage the blower.
4. Keep bystanders and animals at least 15 feet away from the working area.
5. DO NOT put anything in or over the air vents.
6. When finished using the blower, turn off and remove the battery.