background image

6.  Your appliance is equipped with a “pause and serve” feature. This feature  

allows you to remove the carafe before brewing is complete, stopping the flow 
of coffee, allowing you to pour a cup and return the carafe for continued brew-
ing. 

Warning: Avoid touching warming plate when carafe is removed.

1. Setting the Clock
 

•  When the unit is plugged in, the LCD displays “AM12:00” and flashes. 

Press “HR” or “MIN” button to stop flashing.

 

•  Press the “PROG” button. The following action should start within  

5 seconds.

 

• Set the hour by pressing “HR” button.

 

• Set the minutes by pressing “MIN” button.

2. Brewing Coffee At Once
 

• Press the “ON/OFF” button until the red LED illuminates. 

 

•  The coffeemaker will begin operating at once. To deactivate the coffee-

maker, press the “ON/OFF” button again, and the coffeemaker will  
immediately shut off. The red LED will also shut off.

3. Setting the Automatic Timer 
 

•  Ensure green LED and red LED are 

both off, or press the “ON/OFF” button 
until they are off.

 

•  Press the “PROG” button twice.

 

•  Set the expected auto-on time by  

pressing “HR” button and “MIN”  
button to set the hours and minutes  
respectively. The LCD display will 
switch back to clock mode if there is no 
button pressing action for  
5 seconds. If it happens before the 
required time can be set,  
press “PROG” button to redo the step.

 

•  Press “AUTO” button once to activate timer, green LED will light up, and 

“Set timer” will appear next to the minutes on the LCD display. The LCD 
display will return to real time after five seconds.

 

•  After the coffeemaker finishes an auto-brew cycle, the timer will self- 

cancel. Therefore, the auto-on time must be programmed every time as 
needed.

4.  Cancel the Auto-on Function/Exit the Program Setting 
 

•  If you have programmed a brew cycle time and wish to cancel before the 

auto brew begins, press the “AUTO” button until the green LED is off.

Note:
1. Check the preset auto-on time by pressing “PROG” button twice.
2.  At auto-on mode with auto-on time checking, “HR-MIN” buttons cannot  

be activated.

3. When brewing, the red LED is on.
4.  Without pressing any buttons within 5 seconds, LCD will return to real time  

display automatically.

5. The coffeemaker will shut off automatically after 2 hours.

6

7

1

888

557

3848

Wards.com      

Operating Instructions 

(cont’d)

Programmable Timer 

(cont’d)

Programmable Timer

Reviews: