Montgomery Ward 772975, Instruction Manual

Page: 5 / 8

1
•
888
•
557
•
3848 Wards.com
8 9
Cleaning & Storing (cont.) Cleaning & Storing
1. Turn off and unplug the vacuum.
2. Always allow it to cool completely before cleaning.
3. Disassemble the tool and/or tube from the adapter.
4. DO NOT use abrasive brushes or pads, or harsh cleaning solutions.
5. Wipe down the exterior parts of the vacuum with a damp cloth, as needed.
6. Clean the dust canister:
a. Open the canister door over a waste receptacle to empty dust/debris.
b. Close the door.
c. Press and hold down the canister release button and pull the canister from
the vacuum handle.
d. Twist the canister cover counterclockwise to open.
e. Remove the filters and hand wash in warm, soapy water. Air dry.
f. Wipe the inside of the canister with a soft cloth.
g. Replace the dry filters and reattach the cover to the canister.
h. Reassemble the canister to the handle.
7. Do not immerse any electric tool, appliance, cord or plug into water.
8. Ensure all parts are dried thoroughly before reassembling and using the
vacuum.
9. For storage, attach the wall hanger in a convenient, dry location with 2 screws
(use wall anchors if needed). Hang the vacuum in a vertical position.
screw
screw