9
RAISE AND RELEASE
DRAWER FRONTS
This unit is equipped with a raise and
release drawer front. To open, lift up on the
drawer front while pulling towards you. To
close, shut the drawer firmly until the latch
engages.
If the drawer does not stay closed, the hook
may be bent, or it may be rubbing against
the drawer slides. To fix this problem, lightly
bend the hook until the drawer will engage
in the slide.
Lift
DRAWER REMOVAL
Pull the drawer out so that it’s almost fully extended. Push up on the black release lever
on one side, while pushing down on the black release lever on the other side. While
holding the levers in these positions, pull the drawer outward until it is released from the
drawer slide.
ONE SIDE – PUSH UP
OTHER SIDE – PUSH DOWN
DRAWER REPLACEMENT
Extend the drawer slides from the unit. Insert the brackets on each side of the drawer
into the slots in the slides, being careful that they are properly positioned. Once properly
inserted, completely close the drawer to set the slides in position.
