8
INSTALLATION
This organizer is built for 16" on center wall
studs. Locate the wall studs and mark the
locations of the four holes shown in the
illustration. Use a level to make sure the
organizer is straight.
Pre-drill pilot holes into the wall studs.
Secure the self-tapping screws into the
marked locations, leaving enough room to
position the organizer in place using the
keyhole slots.
Then tighten down the screws to secure the
organizer in place.
Note: To secure into dry wall, use the plastic
drywall anchors. For safety and security, the
organizer should be mounted into at least
one stud wall.
7"
16"
