Montech BA-100035, User Manual

Page: 30 / 38

Operating instructions
Handling Components gripper GPP
28
Connecting and adjusting the inductive proximity switches
The proximity switches used must have a switching distance (Sn) of 2 mm, be designed for flush mount-
ing, and have a hous-ing -Ø of 6.5 mm.
Connection diagram for inductive proximity switch
3.11. Replacing the GPP gripper guide system
Important: Always replace the complete guide system, incl. balls!
–
Loosen grub screw (340); do not unscrew completely.
–
Remove screws (120/60)
–
Lift off complete guide system from the gripper. In the event of damage during the guarantee
period, seal the guide system, incl. balls, in a bag and send to the Montech national agent.
–
Lubricate all individual parts of the new guide system with Paraliq P460 (Art. No.
504721) before installing. For the content of the new guide system,
–
Fasten inside end piece (120/30; assembly 1 or 120/20; assemblies 2 and 3) on the
inside of the left and right gripping jaws.
–
Temporarily fix rail guides (120/10) on the housing support surface (10). To do this, completely
screw in the screws (120/60) and loosen by 0.5 a turn.
–
Insert gripping jaw with end pieces (120/30 or 120/20) facing inwards. Ensure that the roller (60)
comes to rest on the slide (30) in the oblique groove of the gripping jaw.
–
Push gripping jaws by hand outwards to the open position so that the drive unit (piston slide, 30)
also moves.
–
Introduce balls and then mount the end pieces on the outside (120/20).
braun : brown
schwarz : black
blau : blue
Direct current (DC)
Direct current (DC)