5
© 2013 Monte Carlo Fan Company
11/5/2013
13
14
15
16
17
18
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Loosen 3 and remove 1 preassembled
screw from the light pan. Save screw for
later use.
Connect white wire from fan to white wire
from LED light kit and then connect blue
wire from fan to black wire from LED light
kit.
Attach LED light kit onto the light pan,
aligning the keyhole slots on the LED light
kit with the preassembled screws on the
light pan. Twist clockwise till lock.
Reinstall the screw removed in step 15.
Tighten all screws securely.
Attach glass to light pan by locating
dimples in light pan with grooves on the
glass and twist clockwise until tight.
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 /
Evereday A23 / GP 23A all 12V. Attach
cover of remote by placing over buttons
and snap the battery cover in place.
Attach light pan onto the plate on motor,
aligning the keyhole slots on the light
plate with the preassembled screws on
the plate. Twist clockwise till lock.
Reinstall the screw removed in step 13.
Tighten all screws securely.
Plate on motor
Light pan
Battery cover
Battery
Light pan
LED light kit
Glass
Light pan
Summary of Contents for 5NKR52XXD Series
Page 9: ...Nov 2013 ...
