Install switch plate by placing over
the 2 screws and twisting into place.
Install screw removed and tighten all
3 screws securely.
20
Push plug from fan and plug from
switch plate together.
21
Put plug from fan through hole in
switch plate.
19
Install glass and finial nut.
26
Plug white wire from fan to white
wire from light kit. Then plug black
wire from fan to black wire from
light kit.
23
Place light kit over screws and twist
direction of arrow into place. Then
tighten all 3 screws securely.
24
Loosen 3 screw on light plate as
shown.
22
Install 3 x 40 watt candelabra bulbs. Bulbs
included.
WARNING: Over lamping the fan will
result in the fan lights shutting down
until the proper wattage of bulbs are
installed.
Reset the lights by turning off the wall
switch, breaker,or by remote. Replace
bulbs with the correct wattage bulbs, turn
the power on.
25
