© 2011 Monte Carlo Fan Company
4/25/2012
3
Before you begin installing the fan, Switch power off
at Service panel and lock service disconnecting means
to prevent power from being switched on accidentally.
When the service disconnecting means cannot be
locked, securely fasten a prominent warning device,
such as a tag, to the service panel.
Remove the cotter and keeper pin
from the yoke and save.
1
4
Thread lead wires through the down-
rod with canopy assembled.
6
Before installing this fan make sure the outlet
box is properly installed to the house structure.
To reduce the risk of fire, electric shock, or per-
sonal injury, mount to outlet box or supporting
system acceptable for fan support.
(Mounting must support at least 35 lbs.)
Install the Mountiing Bracket to the
Outlet box.
Use only the screws
provided with the outlet box.
3
2
Thread wire through downrod with
canopy and yoke cover assembled.
5
Insert downrod into motor yoke.
Next, insert clevis pin through yoke
and downrod and secure with cotter
pin.
7
Tighten the set screws securely.
8
Lift the fan assembly and place into
the mounting bracket.
9
