Loosen lock nuts and screws on y oke
till you can not feel screw on inside
of yoke.
Remove keeper from cross pin and
then cross pin from y oke. Replace
keeper on cross pin and sa ve.
9
10
Lift mounting neck to mounting Plate and align
screws.
7
Loosen set screw that holds ball.
11
Slide ball down and remo ve pin save
pin for later.
12
Install yoke cover over downrod onto
fan body.
Install arch arms to arch hub .
17
16
Install downrod into yoke. Align hole
in downrod with hole in y oke and
install cross pin. Install k eeper into
cross pin.
14
Tighten 2 downrod set screws and
lock nuts.
15
Thread leadwires and safety cable
through downrod.
13
Tighten screw on arch hub into
downrod to hold in place.
18
Secure mounting neck to the mounting plate
with 6 screws to become a complete mounting
bracket.
8
