5
© 2019 Monte Carlo Fan Company
1/2019
13
14
15
16
17
18
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Loosen 2 and remove 1 preassembled
screw from light pan. Save screw for later
use.
Connect white wire from fan to white wire from
LED light fixture and then connect blue (or
black) wire from light pan to black (or blue)
wire from LED light fixture. Be sure plugs
connection clasped together completely.
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on the
light pan. Twist clockwise till lock. Reinstall the
screw removed in the installation step 15.
Tighten all screws securely.
Note
: If you don’t want to install the fan with
LED light, go to step 20 for blanking plate
installation.
Only apply to the items
with blanking plate.
Remove decorative setscrews from light
pan. Keep them.
Attach glass by locating dimples in light
pan with grooves on the glass and twist
clockwise until tight.
Place the lead wires from fan over the
central hole of light pan.
Aligning the keyhole slots on the light pan
with the preassembled screws on the
plate. Twist clockwise till lock. Reinstall
the screw removed on installation step
13. Tighten all screws securely.
Plate on motor
Light pan
LED light fixture
Glass
Decorative setscrews
Install LED Light Fixture
Summary of Contents for 4TSR56 D Series
Page 10: ...Mar 2019...