5
13
14
15
16
© 2021 Monte Carlo Fan Collections
12/2021
Make wiring connections as indicates above, using wire connectors provided.
Connect Black wire from fan to Black (Live) wire from house. Connect White wire from
Fan to White (Neutral) wire from house. Connect all green grounded wires to Grounded
wire from House. Make sure that no filaments are outside of the wire connectors.
After making the wire connections, the wires should be spread apart with the grounded
conductor and the equipment-grounding conductor on one side of the outlet box and
ungrounded conductor on the other side of the outlet box. The splices after being made
should be turned upward and pushed carefully up into the outlet box.
Caution
: The installation has to be complete before operate the fan.
Lift Canopy, allowing the 2 studs to
protrude through the canopy.
Make sure the studs protruding from the
bottom of the Mounting bracket are
installed with threads all the way through
the bracket.
Install knurled nuts provided and tighten
the knurled nuts securely. The canopy
should adjust for any irregularity in the
ceiling or outlet box.
Attach decorative cap by locating the
screw heads at bottom of the canopy
with grooves on the cap and twist
clockwise until tight.
Install the bottom cap by locating dimples
in the plate on the motor with the grooves
on the cap and twist clockwise until tight.
Bottom cap
Plate on motor
Stud
Decorative cap
Power
supply
Wall switch
Black
Black
White
White
Grounding/Green
Summary of Contents for 4SBWR56 Series
Page 9: ...Feb 2022...
