4
© 2018 Monte Carlo Fan Company
12/2018
7
8
9
10
11
12
Make wiring connections using wire
connectors provided as indicated above.
White (Neutral) from house to White from
remote receiver marked AC N. Black
(Live) from house to Black from remote
marked AC L. Connect all green
grounded wires to Grounded wire from
House. Make sure that no filaments are
outside of the wire connector.
Lift motor assembly, aligning the set
screws on the plate on top of motor with
the screw holes on mounting plate.
Tighten all screws securely.
Loosen 2 screws across from each other
and remove the other 2 preassembled
screws from side of mounting plate
(corresponding to installation step 10).
Save screws for later use.
Attach housing onto mounting plate,
aligning the keyhole slots on the housing
with the screws on mounting plate and
twist clockwise till tight. Reinstall the
screw removed in step 9. Tighten all
screws securely.
Attach decorative ring by locating the
head of set screws on housing with
grooves in the decorative ring and twist
clockwise till tight.
Insatll flywheel. Align the holes on
flywheel with the screw holes on motor
and install it onto the motor with set
screws provided. tighten all screws
securely.
Housing
Power
source
Black (Live)
White (Neutral)
Receiver
Hook
Wall switch
Flywheel
Green/Ground
Decorative ring
Set screw
Set screw
Mounting plate
Summary of Contents for 3TAHR56 D Series
Page 10: ...Mar 2019...
