7
24
25
27
28
26
29
1/2020
© 2020 Monte Carlo Fan Collections
Reinstall the screw removed in step 22.
Tighten all screws securely.
Connect white wire from fan to white wire
from LED light fixture and then connect
black (or blue) wire from fan to blue (or
black) wire from LED light kit.
Note
: If you don’t want to install the fan
with LED light, go to step 29 for blanking
plate installation.
Remove 3 preassembled screw from the
light pan. Save screws for later use.
Attach LED light fixture onto the light pan,
aligning the holes on the LED light kit with
the screw holes on light pan. Reinstall the
screws removed in step 25. Tighten all
screws securely.
Attach lexan shade by locating dimples in
light pan with slot on the lexan shade and
twist clockwise until tight.
Attach blanking plate by locating dimples
in light pan with grooves on the blanking
plate and twist clockwise until tight.
Note
:
Do not install LED light kit if
use blanking plate.
Blanking plate
Light pan
Install LED Light Kit
Install Blanking Plate
LED
light fixture
Lexan shade
1
2
1
2
1
2
