11
3 - INSTALLATION AND WIRING
3.1 - INSTALLATION
Make sure that the installation position is a protected one
so that the cables cannot be trampled or tripped on.
Make sure that the shape and load rating of the mounting
surface are suitable for a safe installation.
If the system is placed over a surface, make sure that the
cables are placed in a protected position to avoid the risk
of the speakers falling over if somebody trips over them.
The WIDE15P / WIDE12P speaker system may be placed
over standard speaker supports stand by means of built-in
adapter (i: page 13).
The M10 thresed inserts (l: page 13) are intended for
fixed installation by means of standard or custom-made
mounting accessories.
For a safe installation is mandatory that these accessories
are specified to safely support the speaker weight.
It is the installer's responsibility to verify that the
installation's safety has not been compromised.
When used as stage monitors, the exclusive, adjustable
anti-slip feet allow to adjust the tilt angle.
3.2 - WIRING OF THE CONNECTION CABLE TO THE
SPEAKON
®
CONNECTOR
1 - Strip the cable for 20 mm of length and strip each wire
for 8 mm of length . We suggest to use a cable with
2 x 1.5 mm
2
section wires (the insert terminals are
however suitable for a cable with wires up to a section of
4mm
2
/12AWG).
2 - Insert the cable into the bushing and into the chuck
(white chuck for a cable diameter of 5 ÷ 11mm; black
chuck for a cable outer diameter of 9.50 ÷ 15mm).
Fit a ferrule at the end of each wire and connect wires on
the insert.
3 - The wire ends can be clamped in the terminals using
a PZ1 screwdriver or soldered. Always pay attention to
the symbols shown on the connector body: connect the
positive wire to the terminal labelled 1+, the negative wire
to the terminal labelled 1- .
Terminals 2+ and 2- are not used.
4 - After connecting the wires to the insert, lead it through
the body and screw down the body with the bushing.
Mating connector is a Neutrik Speakon® model NL4-FC.
speakon
®
connector
housing
bushing
chuck
cable
ferrules
for
strands
wires
1
2
3
4
cable
wires
20 mm
8 mm
insert
setscrews
inside
view
ENGLISH
user's manual
