Montarbo HP-24, User Manual

Page: 5 / 16

HP-24 ENG
User manual
9 8
2 GAIN
Knob to adjust the amplification gain of the audio signal.
3 VOL 1-2-3-4
These knobs adjust the individual output level of each channel.
4 CH1-2-3-4 OUTPUT
Headphone output connectors on 6.35mm Jacks.
5 DC INPUT
Bipolar connector for external power supply unit connection.
6 POWER ON/OFF
Switch for turning the unit on/off.
7 GROUND TERMINAL
Use if the hum in connections between different devices has to be eliminated.
8 AUX OUT
Unbalanced auxiliary output on 6.35mm Jack connector.
Frequency response
10 Hz - 35 kHz
Noise ratio 101.7 dB
Maximum input level 5.5 dB (32Ω) / 12.2 dB (300Ω) / 12.3 dB (600Ω)
THD+N Ratio
0.006% @1kHz 32Ω / 0.0008 % @1kHz 300Ω/600Ω
Maximum output power
2 x 227mW@32Ω / 2 x 140mW@300Ω / 2 x 138mW@600Ω
Stereo isolation 62.3 dB (32Ω) / 77.1 dB (300Ω) / 86.4 dB (600Ω)
Input impedance
50 Ω
Input connectors
2 x 6.35mm balanced, 1 x 6.35mm auxiliary stereo
Output connectors 4 x 6.35mm stereo, 1 x 6.35mm auxiliary stereo
Controls
Gain control knob (0 - 20 dB)
STEREO-MONO switch
4 x independent knobs for volume control
Power supply
Universal SMPS power supply unit with interchangeable plugs:
INPUT: 100-240V~ 50/60Hz 0.75A
OUTPUT: 12V DC / 2A 24W
TECHNICAL SPECIFICATIONS
9 AUX IN
Unbalanced auxiliary input on 6.35mm Jack connector.
10 MONO/STEREO
Press this switch to switch between stereo and mono listening.
11 BALANCED INPUTS (L/R)
Balanced input audio connectors (right channel R - left channel L).
5
6 7 8 9 10 11