RIO A2
- 6 -
CONTROL ELEMENTS
Rear Panel
7. The Battery compartment
You can insert or change the 9 Volt Battery by loosen the screw and open the
compartment.
8. Input Connectors
Both XLR and unbalanced 1/4" TRS jack input connectors are supplied in your RIO A2
Direct Box for maximum flexibility.
9. Link Connector
This 1/4" TRS jack will output the incoming signal directly being wired in parallel with
the Input Connectors.
10. Output Connector
Finally, the output signal at MIC level will be produced by this XLR output co-nnector.
You must pay particular attention to the wiring of this XLR connec-tor if phantom power
of +48V is supplied to your RIO A2 Direct Box.
XLR Connector
Phantom
Power Supply
PIN1 ( Ground )
PIN2
PIN3
GND
+48V
+48V
7
8
10
9
1
2
3
RIO A2
- 7 -
APPLICAZIONI
Input
Link
Output
Input
Output
1. Quando la sorgente di ingresso è un Basso
2. Quando la sorgente di ingresso è un microfono
