23
www.montanarigiulio.com
MGX80
ENGLISH
2. Place the two extremities of the mechanism levers release in the holes of the
brake as shown in the figure below.
7.3 Connection of the hand release lever for machine room use and rescue
system performance
Connection and installation must be carried out in such a way that the lever and
the flywheel can be operated simultaneously. Fig. 22.
This allows you to perform the rescue system operation correctly.
1. Place the flywheel into the appropriate hole as shown in the figures 20 - 21.
1. Flywheel for rescue
system (MR)
2. Arm for fixing the flywheel
4. Lever for rescue system connected to the
brake levers by cable (all included in the supply).
Fig. 20
Fig. 21
Fig. 22
3. Flywheel installed and
ready for rescue system
operation.
