19
www.montanarigiulio.com
MGV25 S-M-ML-L
ENGLISH
5.3 Brake
The gearless machine is supplied with a brake that conforms to the standards
indicated in paragraph 2.5.
The brake system is pre-calibrated by the manufacturer and no further adjustment
is required.
The brake system operates as follows:
• Not powered
(electromagnet not powered): the brake disc is clamped by
the movable surfaces (yellow arrows Fig. 7). In this condition the system does
not move.
• When the brake electromagnet is
powered
, it releases the brake disc
(yellow arrows Fig. 8); now the motor is released.
!
!
AIR GAP 0,5 mm
AIR GAP 0 mm
Brake system not powered
Brake system powered
Fig. 7
Fig. 8
6. INSTALLATION
6.1 General installation information
The gearless machine must be installed in a building or in a closed travel com-
partment.
Do not use the gearless machine in an explosive atmosphere.
The room temperature must be between 0°C and +40°C.
Assembly and installation must be carried out with great care by qualified and
trained personnel.
The manufacturer cannot be held responsible for damage caused by incorrect
assembly or incorrect installation.
Before starting work, make sure that adequate lifting and handling equipment
is available.
No welding work must be carried out on the unit.
The unit must not be used as a grounding point for welding operations. The
bearings can be irreparably damaged.
All fixing points specified by the manufacturer must be used.
!
!
