Montanari KB40, Installation, Use And Maintenance Manual

Page: 26 / 40

60
PP65
ONE-WAY PROGRESSIVE - DOWNWARDS ONLY
RE. Product
Catalogue
Cab S
m/s
Tripping S
m/s
P + Q max kg
Guide thick-
ness H mm
L CODE ART.
TAB 286 2,8 3,22
TOS 1620 - 6450
14 - 16 260 AC0000135
LOS 2080 - 6370
For lifts and goods hoists.
Braking by means of wedge jaws operating only downwards. Fix through the side pla-
tes (standard) or directly with the two bearing pins.
If the side plates are used, the fixing holes are those indicated in Fig. 16.
Connect the 2 safety guard units together using a steel torsion bar. The square
section must have a 16 mm side.
Fix it with the special sleeves provided.
The length depends on the distance between the guides with the following relation:
Lb = DG - 210
• Lb = bar length in mm
• DG = distance between the head of the guides
A safety switch (not supplied) must be mounted on the frame to stop the machine at
the latest when the safety guard grips. Each frame builder is free to adopt the most
appropriate method.
The safety gear activation lever has several holes to which you can attach your con-
nection device to the speed governor rope.
The force to be applied to the lever shall be between 140 and 900 N.
After installation, make sure that the locking wedges move at the same time when
the lever is operated.
The guides must be aligned with the safety gear unit.
There must be a clearance of approx. 2 - 2.5 mm on both sides of the guide.
The safety gear unit must be centred with the guide. Use the adjustment screw to
move it.
LOS: Dry and lubricated machined guides
TOS: Dry and lubricated drawn guides
Tab. 11
FIG. 16