4. Put the two frame parts together to form one frame. Then, mount the angle
brackets on all four corners of the frame, and screw the brackets into the legs
using the four M10 x 35 mm screws – one in each corner. Make sure the screws are
tightened firmly using the Allen key. Insert the four black plastic extension-leaf
runners into the recesses in the end rails.
5. Position the extension-leaf frames in the end support rails to rest in the plas-
tic runners. The table top is now affixed to the frame. The four holes in the cor
-
ner of the table top must fit the holes in the frame/legs. Use four RH 5 x 20 mm
screws to mount the tabletop. Finally, mount the tabletop on the frame using
RH 5 x 20 mm screws in the holes along the side support rail and the end support
rail.
M A N U A L – E N G L I S H
3
M A N U A L – E N G L I S H
4
Summary of Contents for JW
Page 1: ...JW TABLE ASSEMBLY GUIDE ...