34
3. Re-tighten the bolts to secure the
fender tail in place (Fig. 43).
INSTALLING RACKSTAND™
CONTINUED
After attaching RackStand to your bike,
the rear fender may need to be adjusted.
In the folded position, the weight of the
bike rests on the “tail” of the fender. For
the folded bike to rest at the correct
angle, the position of the fender tail can
be extended or shortened.
To Adjust RackStand:
1. Loosen the two bolts holding the tail
of the fender in place (Fig. 43).
2. Slide the fender tail to a length that
will hold the folded bike with the seat
tube perpendicular to the ground
(Fig 44). The fender will need to be
longer for a mountain bike than a
pavement bike.
Fig. 43: Loosen fender tail bolts.
Fig. 44: Correct bike position with Rackstand.
Summary of Contents for DIRECT CONNECT
Page 51: ...51 ...
Page 53: ...53 ...
Page 55: ...55 ...
Page 56: ...56 From MONTAGUE CORPORATION P O Box 398032 Cambridge MA 02139 ...
