Monster Vision MAX 3D, Owner'S Manual

Page: 21 / 32

19
4.3.4 Optimizing IR 3D Sync Signal
In order for the Vision Max3D Eyewear to function at their optimum level a strong IR Sync
signal is a requirement. Starting with the IR Sensor as close, move the sensor near the IR 3D Sync
on the TV until the strongest signal is achieved.
Once you have the strongest signal possible, mount the IR Sensor with double sided tape
to the TV or cabinet so that the signal strength can remain strong.
4.4 ADVANCED SEtUP
4.4.1 Understanding Pairing
For the average installation which has only 1 transmitter with multiple Eyewear, pairing the
transmitter to the Eyewear is not required. M Multiple Eyewear will find a single transmitter
and sync without any problems. However there are situations that require pairing in order for
Vision Max3D to function correctly.
Examples of When to Pair the Eyewear
• Installations with multiple sets of Transmitters
• Multiple Dwelling Units such as apartments where a neighbor may be using
a Vision Max3D Transmitter
Under these conditions pairing is required so that the Eyewear can latch onto the transmitter
for the room it is being used in without interference. This is analogous to long distance driving
in a car where the radio picks up different stations on the same frequency as the range of one
bleeds into the range of the other.
Pairing dedicates a specific Eyewear unit to a specific transmitter preventing this bleed over
from occurring.
4.4.2 Multiple Eyewear Units
Multiple Eyewear units can be paired to a signal transmitter allowing for 3D viewing by more
than 1 person. The number of Eyewear units that a can pair with a transmitter with is unlimited.