•
To ensure all panels light up, make sure all the connectors
always point GREEN side AWAY from the controller.
• Only one
GREEN
side should ever be connected to any one
panel at a time (but it can be connected to any port).
• Pointing the directional markers on the back of each panel
towards or away from each other will create different lighting
effects when panels are combined (colors used for reference).
• Thanks to the geometry of the mounting bracket, you can remove,
rotate, and replace a panel at any time during or after installation .
GETTING STARTED
Thank you for choosing the Prism 3D LED Art Panels by Monster
Smart Illuminessence. This
Design Guide
will help you with
creating the design of your Prism pattern.
Please consult the Quick Start Guide for all setup and
installation instructions.
GREEN always
points AWAY
from controller
RED always
points TOWARDS
controller
• For best results, position the controller somewhere on the left
or the bottom of your pattern.
DESIGN TIPS
• Plan to install your Prism near enough to a power outlet for the
adapter cord to reach - ensure it is not a tripping hazard.
• Save these instructions for future reference.
1
