IR Remote
Operation
1
2
Turn on the Indoor/Outdoor LED Light Strip by
pushing the ON button on the remote control.
(It will turn on into the last used lighting mode.)
3
Set the desired brightness using the buttons to
increase/decrease the intensity of color.
Select the desired color or effect by pushing
the corresponding button on the remote control.
4
Push the OFF button to turn off the Light Strip.
1
2
The battery compartment is located on the narrow
side of the remote control.
3
Place the battery compartment back in the remote
control so it locks in place.
Remove the empty battery and insert a 3V battery, type
CR2025, with the positive terminal pointing upwards.
Changing the remote control battery:
Note: The battery for the remote control has already been
installed. Remove the battery pull tab to operate.
Note: For best operation, point the IR remote towards
the IR Receiver (towards power adapter).
Note: You can use this Light Strip with a timer outlet or smart
plug as it will power on into the last used lighting mode.
