monster tower MTK Bimini Installation Manual Download Page 7

Page: 7 / 8

Do you have questions? Call us @ 877.778.6937 Monday – Friday, 8am-5pm EST

DES-192

REV 1.0

Align the front bow arms to the swivel

mount on the front leg. Thread the knob

from inside the boat to the outside.

At the rear of the tower attach the adjustable

straps to the strap eyes on the rear leg. Pull

down on the back of the bimini then tighten

the buckle until the straps are taught.

Repeat for both sides.

Hardware Needed:

Step 5:

Attaching Tension Arms to Tower (Continued)

Summary of Contents for MTK Bimini

Page 1: ...LATION VIDEO ONLINE DES 192 REV 1 0 2021 Monster Tower All Rights Reserved 2640 Byington Solway Rd Knoxville TN 37931 877 778 6937 monstertower com c CAUTION DO NOT EXCEED 45MPH WITH BIMINI TOP OPEN DOES NOT REQUIRE FULL REMOVAL WHEN PUTTING BIMINI DOWN ...

Page 2: ...tower com c DES 192 REV 1 0 Parts List 6 Twist Knob Screws 6 90 Degree Swivel Mount 2 Metal Strap Eye 2 Nylon Straps Gather Additional Tools and Materials For added assistance when installing the bimini please call us at 877 778 6937 4x 12x 2x 2x 6x 6x 2 8 x 3 4 10 x 3 4 Included Hardware Identification Tape Measure Center Punch Permanent Marker Hand Drill 9 64 Drill Bit ...

Page 6: ...937 monstertower com c DES 192 REV 1 0 Step 5 Attaching Tension Arms to Tower Make sure the NON THREADED HOLE on the swivel mount is FACING OUTSIDE Align and attach both back metal bow legs to the swivel mounts At the front of the tower locate the support poles and align them with the fixed angle mounts Thread the knob in from the bottom Hardware Needed 1 2 6 ...

Page 8: ...way Rd Knoxville TN 37931 877 778 6937 monstertower com c DES 192 REV 1 0 Congratulations You have just successfully installed your new Monster MTK Bimini Tag us on social media to be featured on our feed Welcome to the team Send us a picture of your install out on the water to our gallery on MonsterTower com 8 Final Product ...