8
SIGNATURE HTPS 7000 MKII POWERSOURCE FEATURES
1. “ON/OFF” Button:
Turns ON/OFF the outlets programmed as “SWITCHED ON” or “SWITCHED ON AFTER DELAY”.
2. “Menu” Button:
Press to begin programming mode.
3. “Select” Button:
Press to set parameters or options selected by the “Menu” button.
4. “Dimmer” Button:
Adjusts the brightness of the alphanumeric display.
5. “Audio Filter” Indicator:
Indicates power is being supplied to the analog audio outlets.
6. “Digital Filter 1” Indicator:
Indicates power is being supplied to the digital outlets.
7. “Digital Filter 2” Indicator:
Indicates power is being supplied to the digital outlets.
8. “Video Filter” Indicator:
Indicates power is being supplied to the video outlets.
9. “High Current Filter 1” Indicator:
Indicates power is being supplied to the ultra-high current outlets.
10. “High Current Filter 2” Indicator:
Indicates power is being supplied to the ultra-high current outlets.
11. Digital Input Voltage and Current Usage Meter:
Indicates input voltage and amperage draw.
12. “Ground OK” Indicator:
Indicates the PowerSource is plugged into a properly grounded 120V AC outlet.
13. “Protection On” Indicator:
Indicates Monster surge protection circuitry is functioning properly.
14. “Clean Power On” Indicator:
Indicates Monster Clean Power circuitry is functioning properly.
15. “Abnormal Voltage” Indicator:
Indicates that the incoming voltage is below approximately 90V AC
or above approximately 127V AC.
16. “Wiring Reversed“ Indicator:
Indicates the wiring L-N in the outlet that the PowerSource
is plugged into is reversed.
17. Analog Audio Filter:
These outlets have a specifically designed filter circuit that reduces interference
to your audio components.
18. Digital Filter 1:
These outlets have a specifically designed filter circuit that reduces interference
to your digital components.