6
HOOKUP GUIDE
STEP 1
Pay-Per-View/Phone Line Hookup
NOTE:
HTS1000, HTS1000 CI, HTS2000 and HTS2000 CI PowerCenters are intended for hookup of a single line phone only.
A second line will NOT be connected through the phone line surge protector.
A)
Connect the end of your phone cable into the phone wall outlet. Plug the other end into the PowerCenter
“Phone In” jack (figure 1a).
B)
Connect a phone cable into one of the PowerCenter “Phone Out” jacks and plug it into the Pay-Per-View
input on your DSS receiver or DVD player (figure 1b).
FOR STANDARD TELEPHONE LINE PROTECTION (NOT A PAY-PER-VIEW COMPONENT)
C)
Connect a phone cable from the telephone wall jack to the PowerCenter “Phone In” jack, then connect
a phone cable from the PowerCenter “Phone Out” jack to the telephone.
IN
OUT
PowerCenter PHONE
Figure 1a
From telephone
wall jack
Figure 1b
To DSS receiver
or DVD player
Figure 1
