Indicates the "Digital Filter 2" outlet pair has power.
Indicates the "Video Filter" outlet pair has power.
Indicates the "High Power 1" outlet pair has power.
Indicates the "High Power 2" outlet pair has power.
In normal operation, this eight-character LED alphanumeric display will display
the line voltage. In programming mode, it will display options and setting.
: For low current analog audio components such as preamplifiers and tape decks, special
filter circuit that reduces noise from the AC power line that would degrade the audio performance.
It does not harm video components or digital components to be connected to the analog audio
outlet section. However, for the best possible performance, we recommend only plugging in low
current analog audio components here.
This 2A slow blow fuse protects the "Audio Filter" from power overload. Replace only with
same type/rating fuse.
: For digital components such as CD players, DVD players, and satellite receivers, this
special filter circuit is designed to reduce interference from your components such as digital noise from
getting into the rest of your system.
For digital components such as CD players, DVD players, and satellite receivers, this
special filter circuit is designed to reduce interference from your components such as digital noise from
getting into the rest of your system.
NUMBERS REFER TO DRAWINGS ON PAGE 16
12. Digital Filter 2 LED:
13. Video Filter LED:
14. High Power 1:
15. High Power 2:
16. Alphanumeric Display:
17. Audio Filter
NOTE:
18. Audio Fuse:
19. Digital Filter 1
20. Digital Filter 2:
18
