MST3507XTG / MST3507XMB / MST3507XG
3
rev. 10/05/18
Step 1: Attaching the Handle
Align the hole on the handle with the second hole
down on the drawer assembly and (unattached) leg as
shown in figure 2. Insert M8 x 19 handle bolts through
handle, through the legs and bumpers, and into the
drawer assembly as shown in figure 2. Secure with
star bolts from handle bolt kit and hand tighten.
Attach remaining M8 x 17 bolts (on the opposite side
from push handle) directly into legs.
Step 2: Tightening Bolts (not shown)
Use a T40 driver to tighten all bolts.
Step 3: Attaching Casters
Turn bottom tray upside down. Align holes in locking
and non-locking casters with matching holes in the
bottom tray as shown in figure 3a. Attach using M8 x
16 Hex bolts, lock washers and nuts from caster bolt
kit and hand tighten.
NOTE
Ensure that both locking casters are on
same end of the cart. We suggest same side as
handle.
2.
1.
3.
3a.
