Changing the Ribbon
Use the Monroe P65M Ribbon
1.
Remove excess paper tape.
2.
Remove the printer cover. (Note how ribbon
feeds from outside of spools, around guides
and between print wheels and platen; black
band up.)
3.
Lift out spool that is not engaged by lever; then
move lever aside and lift out other spool.
4.
Holding new spools over spindles with black
band up and exposed portion of ribbon on side
nearest print wheels, place one spool on spindle
not engaged by lever. Rotate spools to be sure
its pins engage in spindle gear.
5.
Thread ribbon around guides and between print
wheels and platen.
6.
Install other spool and rotate to engage spindle
gear and also to take up slack in ribbon.
7.
Replace printer cover.
Installing Paper Tape
To ensure ease of installation, read the instructions
completely before installing new paper roll. Then
follow the instructions step-by-step.
1.
Gently spread plastic paper roll holders apart far
enough to disengage old paper roll core.
2.
Tear off any paper which may remain on the spent
paper roll core.
3.
Pull remaining paper forward through the printer
or press the paper advance
n
key.
4.
Position the new paper roll on the paper roll
holders with the leading edge feeding from the top
of the paper roll.
5.
Fold the leading edge back to form a straight edge
and insert the leading edge of the paper into the
slot located below and between the paper roll
holders.
6.
Press the paper advance
n
key to advance the
paper through the printer until it reaches the
printing position.
9
Summary of Contents for 2020PlusX
Page 12: ......
