Monosem NG Plus 2, Operator'S Manual, Page: 26 / 76

Operation
24
FERTILIZER
I Set on A1 adjustment.
II Make 100 m
III Use the following formula :
10000 x weight calculated on one outlet (gr)
inter-row spacing (cm)
You obtain the weight/ha. And then you determine the column
on the chart corresponding to the ratio used.
Example : - Inter-row spacing = 30" = 76,2 cm
- weight calculated = 533 gr. On ratio 1
10000 x 533 = 70.000 gr/ha = 70 kg/ha
76,2
The column
4
is used = 70 kg/ha, with a choice from 70 to
350 kg/ha according to the adjustment.
Requirement per Hectare for different fertilizers
4
A1 40 50 60 70 80 90 100 110 120 130
B1 45 60 70 80 90 105 115 125 140 150
C1 60 80 95 110 120 140 160 175 190 205
D1 70 90 110 125 140 160 180 195 215 230
A2 75 100 120 135 150 175 190 210 230 250
E1 80 105 130 145 160 185 205 230 250 270
B2 100 120 140 160 180 205 230 250 275 300
F1 110 140 165 190 215 245 270 300 325 350
C2 120 160 180 210 235 270 300 330 360 390
D2 140 180 210 240 270 310 340 380 410 445
E2 160 200 250 280 315 360 400 440 480 520
F2 200 250 300 350 390 450 500 550 600 650
By means of an initial adjustment (
A1 ) for a known surface area, calculate the minimum requirement
per hectare for the fertilizer used : 80-90-100-110 etc … kilo/ha. The table will then give the setting
(
A1-B1-C1… ) suitable for the required amount per hectare.
IMPORTANT – Fertilizer application rates can vary from the weight calculated in the above chart due
to different brands, temperature, humidity, etc… check your manual for procedure to measure your
fertilizer to the above chart.
WARNING - Agricultural chemicals can be dangerous. Improper use can result in injury to persons,
animals and soil. Handle with care and follow instructions of chemical manufacturer.
http://hespareparts.com