5
3. Using the 3.5mm stereo audio cable, connect one end to the Audio jack on the front of
the Transmitter and the other end into the output of your audio source (smartphone,
computer, etc.).
4. Plug the output of the 5 VDC AC adapter to the DC IN port on the back of the Transmitter.
Plug the other end into an AC power outlet.
5. Slide the power switch on the back of the Transmitter to the ON position.
6. Flip the power switch on the front of the Receiver/Amplifier to the ON position.
ALTERNATE:
Note that instead of using the wireless Transmitter, you can plug your source
device directly into the Line In jack on the front of the Receiver/Amplifier.
Amplifier Front Panel
6
CH+
W
ON
OFF
PO ER
LINE IN
OVERLOAD STATUS
-
0
20
40
60
80
100
ALTERNATE
Computer or other
audio source
Transmitter Rear Panel
Transmitter Front Panel
110V Outlet
Antenna
ANT
DC 3.6V
〜
6V
MUSIC MIC
0 DB
20 DB
POWER
OFF ON
STANDBY
AUDIO
VOL+
VOL-
STATUS
CHARGE
CH+
CH-
4
3
5
