5
Rear Panel
1.
INPUT: Two RCA jacks for connecting a stereo or mono line level input.
2.
SPEAKER LEVEL OUT: A speaker level output that passes through the audio
connected to SPEAKER LEVEL IN. Connect full-range speakers appropriately rated
for the power level of the amplifier connected to SPEAKER LEVEL IN. The VOLUME
control on the front panel does not affect the volume level of speakers connected
to SPEAKER LEVEL OUT.
3.
SPEAKER LEVEL IN: A speaker level input for connecting the speaker level outputs
of an audio amplifier or AV receiver. The audio from this input is passed to the
SPEAKER LEVEL OUT connector, without any modification by the amp.
4.
TRIGGER: A 3.5mm TS jack for connecting a 12-24V trigger signal. When DC voltage is
detected, the amplifier turns on, and when DC voltage is removed, the amplifier
turns off.
5.
SUB OUT: A 5-way binding post for connecting a subwoofer. The output signal will
be modified by the PHASE, CROSSOVER, and VOLUME settings on the front panel.
6.
AC IN: An IEC 60320 C8 panel connector for attaching the included AC power cord.
