background image

10 

SSW-12 (35847) 

Model 

35847 

Inputs 

Mono LFE, stereo line level, and speaker 
level 

Woofer Size 

12" 

Frequency Response 

20Hz ~ 150Hz (-10dB) 

Low-Pass Filter 

50Hz ~ 150Hz @ 18dB/octave 

Phase Control 

0° or 180° 

Output Power 

150 watts 

Total Harmonic Distortion 

< 0.5% 

Dimensions 

29.9" x 19.7" x 7.0" (760 x 500 x 178 mm) 

 
 

REGULATORY COMPLIANCE 

Notice for FCC 

 

This device complies with Part 15 of the FCC rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.  
Modifying the equipment without Monoprice's authorization may result in the 
equipment no longer complying with FCC requirements for Class B digital devices. In 
that event, your right to use the equipment may be limited by FCC regulations, and you 
may be required to correct any interference to radio or television communications at 
your own expense. 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed 

Summary of Contents for SSW-10












Reviews: