background image

 

SS2V70 70V 2-Zone 100-Watt Speaker Selector 

P/N 38165 

Quick Install Guide 

 

INTRODUCTION 

This SS2V70 70V 2-Zone 100-Watt Speaker Selector features two independent mono 70V 
100-watt speaker zones, each with its own on/off switch and volume control knob. It has a 
single 2-conductor input and a pass-through output, allowing multiple speaker selectors to 
be daisy chained. It supports up to 80 watts of 70V speakers connected to each zone. 
 

PRODUCT OVERVIEW 

Front Panel 

 

1.

 

Zone 1 On/Off Switch 

2.

 

Zone 1 Volume Control 

3.

 

Zone 2 On/Off Switch 

4.

 

Zone 2 Volume Control 

 

 

Summary of Contents for SS2V70

Page 1: ...att speaker zones each with its own on off switch and volume control knob It has a single 2 conductor input and a pass through output allowing multiple speaker selectors to be daisy chained It supports up to 80 watts of 70V speakers connected to each zone PRODUCT OVERVIEW Front Panel 1 Zone 1 On Off Switch 2 Zone 1 Volume Control 3 Zone 2 On Off Switch 4 Zone 2 Volume Control ...

Page 2: ...tage systems can use only 80 of the rated wattage of the amplifier and the connected speaker selector This speaker selector is rated for 100 watts so the connected speaker arrays must be equal to or less than 80 watts each If each speaker is set to 5 watts for example you can connect up to 16 speakers in each array INSTALLATION Perform the following steps to connect this speaker selector to your 7...

Page 3: ... no stray wire strands 12 Connect the other end of the wire to the 70V and Common terminals on your amplifier taking care to match the polarity 13 Insert the terminal block back into the rear of the speaker selector 14 Optional Connect a speaker wire to the THRU terminal block on the speaker selector then connect the other end to the INPUT terminal block on a second speaker selector using the same...

Page 4: ...ct the Technical Support department through the online chat button on our website www monoprice com or by sending a message to tech monoprice com Check the website for support times and links SPECIFICATIONS Model 38165 Frequency Response 20Hz 22kHz 0dB Power Handling 100 watts per zone Maximum Usable Speaker Wattage 80 watts per zone Supported Wire Gauge 16 AWG Volume Attenuation 33dB 10 steps plu...

Reviews: