9
4.
Plug one of the included AC power cords into the AC IN jack on the soundbar, then
plug the other end into a nearby AC power outlet.
5.
Press the STANDBY button on the soundbar side panel to turn the soundbar on.
6.
Within about 30 seconds, the Pairing Indicator on the subwoofer will cease flashing
and illuminate solid, indicating that the subwoofer is paired with the soundbar.
Notes:
The subwoofer and soundbar will remember the pairing and will pair again
automatically when turned on.
If the soundbar is off or in Standby Mode, the Pairing Indicator will change to solid
red after about 5 minutes, indicating that it is in Waiting Mode.
IR REMOTE CONTROL
You will need to install two AAA batteries (not included) in the remote control before it
can be used. Perform the following steps to install batteries.
1.
Invert the remote, then slide the battery compartment cover back to remove it.
2.
Insert two AAA batteries (not included) in the battery compartment, taking care to
match the polarity markings.
3.
Slide the battery compartment cover back in place.
