37
7.
Press both the video and photo buttons on your RF wrist
strap remote control to initiate pairing. When the red
LED on the RF wrist strap remote control flash once,
pairing is complete.
8.
To exit the menu, press the
Mode
button repeatedly until the
EXIT
option
appears.
9.
Press the
Shutter
button to exit
SET
mode.
Note: The wrist strap remote control is waterproof to 196 ft/60 m.
However, water severely attenuates RF signals, so the remote may not
work underwater.
4.13
Factory Default
This menu allows you to restore the factory default settings of your
camcorder.
Do the following to restore the factory default settings.
1.
Press the
Mode
button repeatedly to change to
SET
mode.
2.
Press the
Shutter
button to enter
SET
mode.
3.
Press the
Shutter
button to enter the
MORE
menu.
4.
Press the
Mode
button to highlight
DEFAULT
.
