47
Chapter
Chapter
Chapter
Chapter 8
8
8
8 Security
Security
Security
Security Settings
Settings
Settings
Settings
8.1
8.1
8.1
8.1 Client
Client
Client
Client Filter
Filter
Filter
Filter Settings
Settings
Settings
Settings
You can enable client filtering to control a client computer's access to specific ports of the
internet.
�
Filter
Filter
Filter
Filter Mode
Mode
Mode
Mode::::
You can select either
Permit
Permit
Permit
Permit only
only
only
only
or
Forbid
Forbid
Forbid
Forbid only
only
only
only
.
�
Access
Access
Access
Access Policy:
Policy:
Policy:
Policy:
Select an unused number from the drop-down list.
�
Remark:
Remark:
Remark:
Remark:
Input a simple description of the configured filter rule (you may leave it
blank if you wish).
�
Start/End
Start/End
Start/End
Start/End IP:
IP:
IP:
IP:
Enter the Start IP and End IP address range.
�
Port:
Port:
Port:
Port:
Enter the range of ports to be controlled. The two values may be the same,
indicating a single port rather than a range of ports.
�
Type
Type
Type
Type::::
Select a protocol type (TCP, UDP, or Both) from the drop-down list.
�
Time:
Time:
Time:
Time:
Select the starting and ending time range for the filter to be in effect.
�
Date:
Date:
Date:
Date:
Select the starting and ending day(s) to apply the access policy.
�
Enable:
Enable:
Enable:
Enable:
Check the Enable box to apply the filter after clicking the
Ok
Ok
Ok
Ok
button.
