background image

SPECIFICATIONS 

1. Bluetooth Version: 5.0 
2. Output Power: 8W 
3. Battery Capacity: 2600mAh 
4. Speaker Spec: 52mm 
5. Charging Voltage: DC 5V 
6. Frequency Response: 60Hz-20 kHz 
7. THD

≤0.1%   

 

8. SNR: ≥ 80DB

 

9. 

SIZE:φ82mm×110mm

 

 

Troubleshooting 

Speaker will not turn on 

*If currently charging, ensure your speaker is connected to a working Power Adapter. 
*If operating on battery power, the battery may be in protection mode or discharged. Connect to 
a power adapter to restore the battery to operational mode. 
 

Cannot pair or connect the speaker to my Bluetooth device 

*Ensure your speaker is discoverable (BT status indicator rapidly flashes blue). 
*Ensure Bluetooth is activated on your device and that you have selected the correct device 
name in the Bluetooth device list, and the connection has been confirmed by your device. 
*Your Bluetooth device may be out of range. Try moving it closer to the speaker. 
*If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth functionality. 
*Turn the speaker off and back on, and pair your device and speaker again. 

 
The speaker indicates a connection, but is not playing music 

*Ensure the device you want to hear is connected to the speaker and playing audio. 
*Ensure the speaker is not muted and the speaker volume is turned up. 
*Turn up the volume on your device. 
*Your device may be out of range. Try moving it closer to the speaker. 
Move your device away from any device that generates electromagnetic interference, such as 
another BT device, cordless phone, micro- wave oven, or wireless router. 
*Turn off or disable Bluetooth functionality on all other nearby paired devices and reconnect the 
device you want to hear. 
*Turn the speaker off and back on. 
 

Proper Use 

1.

 

Please charge your new speakers for at least two hours before first use. 

Summary of Contents for MP True









Reviews: