2
5
Installation
Installation without bracket
A
A
1
2
3
4
5
This projection screen should be installed at the best possible viewing position for the audience.
Take out all the parts from the packaging and follow the accessories guideline to ensure you have
all parts. The parts needed will vary depending on which installation you choose to use. For
installation on a wood wall or ceiling, use the 5 x 40 screws. For installation on a drywall, use the
10 x 30 screws with anchors.
Wall Mount
Using a tape measure, measure the distance between the two keyholes on the casing ( Figure 1 ).
According to the measurement, use the drill to drill identical holes of the appropriate size (use a
smaller drill bit than the actual screws) on the wall and ensure that it is level ( Figure 2 and 3 ). Screw
in the appropriate screws, either the 5 x 40 for wood walls or the 10 x 30 plus anchors for drywalls,
leaving enough space at the end to hang the casing ( Figure 4 ). To ensure that the screen is level,
use a leveler to check ( Figure 5 ).
Ceiling Mount
Using a tape measure, measure the distance between the two rings for hanging on the casing
( Figure 1 ). According to the measurement, use the drill to drill identical holes of the appropriate
size (use a smaller drill bit than the actual hook screws) on the ceiling and ensure that it is level
( Figure 2 and 3 ). Screw in the hook screws (not provided), and lift the screen into the hooks
screws to hang ( Figure 4 ). To ensure that the screen is level, use a leveler to check ( Figure 5 ).
A
A
1
2
3
4
5
The ceiling or wall
for fixture installation must be secure to prevent the screens from falling.
While installing electrical motors, please hire professionals or our company to ensure safety.
A misconnection may lead to fire or leaks.
Keep all infrared wireless products away from fluorescent lighting as it may cause malfunctions.
Please read the following as any damage to the screen surface will affect the quality of the picture:
1.Avoid contact or touching the screen surface as it may cause scratches or tears.
2.Do not write or draw on the surface
3.Clean the screen with a soft cloth and luke warm water. Do not use any detergent or cleaning products.
Roll up the screen after every use. Ensure that the screen is level when installing; do not pull on the sides
or fold the screen.
To prevent unnecessary damage, the operating and maintenance of the screen should be done by adults.
used
Ignoring the safety warnings may
lead to injuries and/or damaging
the product.
Refrain from hanging anything on the
screen as it may cause the screen to
fall.
Do not connect any electrical
attachments or remote controls.
Fixtures should be installed in a secure
place to avoid accidents or the screen
falling.
Roll up the screen after every use.
Leaving it hanging for a long period
of time may cause the fabric to loosen.
Please contact our company for
repairs or maintenance. And if you
have any further questions.
Avoid taking apart the fixtures
yourself. Loose parts may cause
the screen to fall.
Warnings
Do not take apart and replace with unknown parts. If there are any problems, please contact our company.
Product specifications are subject to change.
