Specified Mode Operation
If source devices do not support the function of Auto Detection & Auto Adjustment
,
please set the output audio signal of the source device first, and make sure the setting can
be supported by the sink devices. For example, if user set the source to send out a DTS
5.1CH (or Dolby 5.1CH) signal, but the sink device can only support up to 2 CH, you will not
have sound output form the sink device.
If source devices support the function of Auto Detection & Auto Adjustment
, the source
device will auto adjust the output audio signal to the optimal standard based on the following
different modes. Users can also set the audio output signal by themselves. Please make sure
the setting can be supported by the sink devices.
MD-415ARC Switcher
Mode
Mode Action
Recommended Application
Mode 1
Remain TV’s
Audio Signals
※
Preset Mode
In this Mode, output audio signal of the
switcher will remain the original audio
format from TV.
For example, if TV’s audio format is 2
CH, the output audio format will be 2
CH as well.
TV built-in tuner application;
When using TV built-in tuner and
HD antenna to watch HD TV
program, both Video and Audio
format may be delivered as high
definition (for example:1080p and
Dolby Digital) Under this mode, as
long as the audio format from HD
program are supported by current
amplifier, users will hear the best
sound quality from HD program.
Mode 2
Audio Specified
(Dolby Digital 5.1,
DTS 5.1, AAC, and
PCM 2.1 CH.)
Set the output audio signal as one of
the following 4 standards: Dolby Digital
5.1, DTS 5.1, AAC, or PCM 2.1 CH.
For example, if the connected source
device supports AAC audio format
output, the output audio format of the
MD-415ARC will be AAC as well.
Notices:
Please make sure the audio output setting
can be supported by the audio receiver.
Home Theater or sound bar
application; Traditional audio
amplifier may only support Toslink
or coaxial for audio input
connection, please use the Toslink
or Coaxial connector for audio
output connection. Under this
mode, the better sound quality of
amplifier can be designated as the
output audio standard.
Mode 3
Audio Specified
(PCM 2.1 CH. and
PCM 5.1 CH)
Set the output audio signal as one of
the following 2 standards: PCM 2.1 CH.
or PCM 5.1 CH.
For example, if the connected source
device supports PCM 5.1 CH audio
format output, the output audio format of
the MD-415ARC will be PCM 5.1 CH as
well.
Notices:
Please make sure the audio output setting
can be supported by the audio receiver.
Home Theater or sound bar
application; Traditional audio
amplifier may only support Toslink
or coaxial for audio input
connection, please use the Toslink
or Coaxial connector for audio
output connection. Under this
mode, the better sound quality of
amplifier can be designated as the
output audio standard.
6
