5
6.
POWER LED: The LED illuminates red when power is applied.
7.
HDBT OUT: RJ45 connector for connecting a Cat6 Ethernet cable to connect with
the receiver.
8.
CTRL/UPDATE: Switch to determine the behavior of the RS-232 connection. When in
the CTRL position, the transmitter will pass RS-232 signals on to the receiver for
control of a connected device. When in the UPDATE position, you can update the
Valens IC program by connecting to a PC and running a batch file.
Receiver
1.
HDMI OUT: HDMI® port for connecting an HDMI display.
2.
IR IN: 3.5mm jack for connecting an IR receiver (not included).
3.
IT OUT: 3.5mm jack for connecting an IR transmitter (not included).
4.
RS-232: 3-pin Euroblock connector for connecting to a computer for pass-through
RS-232 signals or to update the transmitter.
5.
DC 12V: DC barrel connector for connecting the included AC power adapter.
6.
POWER LED: The LED illuminates red when power is applied.
7.
HDBT IN: RJ45 connector for connecting a Cat6 Ethernet cable to connect with the
transmitter.
8.
CTRL/UPDATE: Switch to determine the behavior of the RS-232 connection. When in
the CTRL position, the transmitter will pass RS-232 signals on to the transmitter for
control of a connected device. When in the UPDATE position, you can update the
Valens IC program by connecting to a PC and running a batch file.
